9 Tips for Maintaining and Cleaning Your Strip Door Kit
Strip doors are essential to many businesses, providing a cost-effective way to control temperature, reduce energy costs, and enhance workplace safety. However, like any other equipment, strip doors require regular maintenance and cleaning to ensure they perform optimally and last as long as possible. Neglecting to maintain and clean your strip door kit can lead to reduced efficiency, shortened lifespan, and costly repairs. Discover nine valuable tips for maintaining and cleaning your strip door kit.
Regular inspections are essential to keep your strip door kit in good condition. You should inspect your strip door kit at least once a month to check for any damage or wear and tear. Inspections can help you detect issues early and avoid costly repairs later on. Check for cracks, gaps in the strips, loose hardware, or other issues that could affect the performance of your strip door.
Keeping your strip door clean is also crucial for maintaining its performance. Dust and dirt can accumulate on the strips and hardware over time, reducing their effectiveness.
To clean your strip door kit, use mild detergent and warm water, and wipe down each strip with a soft cloth. You can also use a pressure washer to remove dirt and grime from the strips and hardware. However, keep the pressure low to avoid damaging the strips.
Lubricating your strip door kit's moving parts is essential for keeping it operating smoothly. Over time, the moving parts of your strip door kit can become stiff or corroded, reducing their effectiveness. Use a silicone-based lubricant to keep your strip door kit's hardware and moving parts working correctly. Also, lubricate the hinges, rollers, and other moving parts regularly to prevent them from rusting or seizing up.
Adjusting the Strips
Ensuring that your strip door's strips are correctly aligned and adjusted is essential for maintaining its effectiveness. Over time, the strips can become misaligned, causing gaps that allow heat or cold air to escape. Adjust the strips using pliers to overlap them and create a proper seal. You can also utilize a heat gun to soften the strips and reshape them if necessary.
Removing and Replacing Damaged Strips
If you want your strip door kit to continue working properly, you need to replace any strips that have become damaged. When a strip becomes damaged or broken, it can negatively impact the door's performance.
You can remove a damaged strip from the mounting bracket and replace it with a new one. High-quality replacement strips, such as low-temperature, standard, and anti-static options, are readily available to suit different business needs. It's important to choose a reputable manufacturer that provides high-quality inventory to ensure the longevity and effectiveness of your strip door kit.
Protection from Damage
To keep your strip door kit in good condition, it must be protected from damage. Consider installing impact plates on the bottom of the strips to protect them from heavy traffic or machinery. You can also use bumpers to protect the sides of the strips from damage when opening or closing the door.
Using your strip door kit properly is also essential for maintaining its effectiveness. Avoid excessive force when passing through the door, which can damage the strips. If the door is hard to push or pull, it may be misaligned or need adjusting.
You can help prevent damage and ensure your strip door kit keeps working well by training your staff to use and maintain it properly. Create a maintenance checklist for your employees, including regular inspections, cleaning, and lubrication. Encourage your employees to report any issues with the strip door kit promptly.
Hiring a Professional
Hiring a professional is best if you're unsure about maintaining or repairing your strip door kit. A qualified professional can help you identify issues and recommend the best action. When selecting a professional, look for someone with experience working with strip door kits and a track record of delivering quality service.
Keep the Area Clear
Maintaining a clear area around your strip door kit is crucial for its proper functioning. Ensure to keep the area around the door clear of debris, such as boxes or pallets, to prevent damage to the strips. Also, avoid storing heavy objects near the door, as they can cause damage if they fall on the strips.
Monitor Temperature and Humidity
Monitoring the temperature and humidity levels in your facility can help you maintain the effectiveness of your strip door kit. If the temperature or humidity levels fluctuate too much, it can affect the performance of the strips. Consider installing a temperature and humidity monitoring system to keep track of the conditions in your facility.
Schedule Regular Maintenance
Scheduling regular maintenance is crucial for your strip door kit to function effectively and maintain its longevity. Consider setting up a maintenance schedule that includes regular inspections, cleaning, and lubrication. This can help you detect issues early and prevent costly repairs later on.
Depending on the frequency of use, your strip door kit may require monthly, quarterly, or bi-annual maintenance. Consider the environment and usage of the kit when deciding on the frequency of maintenance.
Maintaining and cleaning your strip door kit is crucial to its effectiveness as a barrier for your space. Without proper maintenance and cleaning, the strips can become dirty, damaged, and less effective at removing unwanted elements such as dust, insects, and drafts. As a leading provider of high-quality strip door kits, Strip-Curtains understands the importance of maintaining and cleaning your strip door kit. With years of experience in the industry, Strip-Curtains offers a wide range of strip door kits, replacement strips, and accessories to fit any business's needs. If you need a new strip door kit or replacement strips, visit Strip-Curtains to browse our selection.